Commercial Door Installation & Replacement in Washington, DC
Some doors can be saved. Others, warped frames, dead hardware, systems running on borrowed time, genuinely can't. Our team installs hollow metal, aluminum, frameless, and automatic commercial doors across DC, Maryland, and Virginia. Measured to your building, not just bolted in.
Code-CompliantEvery Single InstallSince 2018Installing Across The DMVLicensedBonded & InsuredAssessed FirstNever Assumed
Measured Right, Installed Right
The Right Door, Installed With Care
We treat every door replacement like it's going into our own building. Before we ever recommend a new door, our team inspects the frame, hardware, and structure closely, because getting that first look right is what makes the whole job go smoothly from there.
When a new door really is the answer, we bring the same care to the install. We measure your opening on-site, source a door built for how your space actually gets used, whether that's heavy foot traffic, code requirements, or a security upgrade, and fit it to spec, down to the last hinge. Every install is code-compliant from the frame to the final hardware set.
We handle the full range: hollow metal, aluminum, frameless glass, automatic entries, office glass doors, security and exit doors, and fire-rated doors. One team, one invoice, and a door that's genuinely built for the job it needs to do, installed by people who care about getting every detail right.
We inspect the frame, hardware, and structure first, every time. If a repair genuinely makes more sense, that's what we'll tell you, even though it's the smaller job.
One Team For The Whole Install
Door, frame, glass, and hardware, our technicians handle it all in one visit instead of coordinating three separate vendors. That means fewer scheduling headaches and one clear point of contact.
Built To Code, Every Time
Every commercial door we install meets current code, from fire ratings to accessibility requirements. You're not left guessing whether it'll pass inspection.
Documentation That Backs You Up
You get an itemized invoice and photos of the finished install, useful for maintenance records, warranty coverage, or an insurance claim if the old door failed due to damage.
New doors aren't one-size-fits-all. Here's what our trained technicians measure, source, and install, matched to your building and built to last.
Hollow Metal Doors
When a hollow metal door's frame is too bent or corroded to repair, a full replacement is the smarter call. Our trained technicians handle the install, demo, framing, and hardware setup, so the new door closes flush and locks tight from day one.
An aluminum entry system that's aged out, warped, or constantly out of alignment is a strong candidate for replacement. Our experienced team handles the full install, glass, frame, and hardware, sized and finished to match your storefront, so it performs as good as it looks.
When the pivot hardware or glass on a frameless or Hercules door is beyond saving, replacement gets you back to that same precise, clean look. Our trained professionals handle every measurement and hardware fit during install, so the new door swings smooth and seals tight.
An automatic entry with failing motors, outdated sensors, or a control system nobody makes parts for anymore is a candidate for full replacement, not another patch. We install modern systems that open, close, and sense traffic reliably, built to current accessibility code.
A worn-out office glass door, chipped, loose in its frame, or just outdated, is easily solved with a replacement. Our team installs new office glass doors sized and hung precisely, so they swing and seal the way they should while keeping your interior looking sharp.
When a security or exit door no longer meets code or the frame is too compromised to trust, replacement is the safer call. Our trained technicians install a new unit built to the exact protection and life-safety standard your building requires, panic devices and locksets included.
A fire-rated door that's failed inspection or lost its certification needs a proper replacement, not a workaround. We install new fire-rated doors that close, seal, and hold their rating, so your building passes inspection without a second visit.
Sometimes it's not just the door, it's the whole entry, frame, glass, and hardware together, and that calls for a full system replacement. We handle the install as one coordinated job, so everything from the threshold to the header goes in matched and level.
A frame that's badly bent, rusted through, or cracked at the weld usually can't be straightened back to reliable use. Our trained technicians will tell you honestly when a repair is just delaying the inevitable, and get a proper replacement installed instead of patching something that'll fail again in months.
The Door Is Outdated Or Energy-Inefficient
02
An old door that lets in drafts, doesn't seal properly, or just doesn't match how your business operates today is quietly costing you on energy bills and first impressions. Our experienced team replaces outdated doors with modern, efficient systems built for your actual foot traffic and climate needs.
You Need A Code Or Security Upgrade
03
Sometimes the door works fine, but the building's needs have changed, a new fire code, an accessibility requirement, or a push toward better security hardware. Our trained professionals install doors that meet the exact standard your building now requires, documented and ready for inspection.
On It, Start To Finish
Four Steps. One New Door. Zero Hassle.
Assess & Recommend
We inspect the door, frame, and hardware on-site and give you a straight answer, repair or replace, before any quote is written.
Measure & Order
Once replacement's confirmed, we take precise measurements and source the right door and hardware for your space and code requirements.
Remove & Install
Our trained technicians remove the old unit and install the new one to spec, minimizing downtime at your entrance.
Final Walkthrough & Invoice
We walk the finished install with you, then hand over an itemized invoice with photos for your records or insurer.
If the old door failed due to damage rather than age, you need paperwork that actually supports your claim. We itemize materials, labor, and disposal separately, and attach before-and-after photos, so your insurer has everything they need without chasing you for more details.
How do I know if I need a replacement instead of a repair?
If the frame is badly damaged, the door has failed inspection, or the hardware is obsolete and unavailable, replacement is usually the right call. Our trained technicians assess it on-site and won't recommend replacement unless a repair genuinely wouldn't hold.
How long does a commercial door replacement take?
Most single-door replacements are completed in a single visit once the new door and hardware are on-site. Full storefront entry systems or custom sizes may take longer to source, and we'll give you a clear timeline before work starts.
Do you install fire-rated and code-compliant doors?
Yes. We install fire-rated, accessibility-compliant, and security-rated doors built to meet current code, and we document the install so it's ready for inspection.
Can you match the new door to our existing storefront or building?
Yes. We source doors and finishes that match your building's existing look, so a replacement doesn't stick out like a mismatched patch.
Do you work with property management companies across multiple locations?
Yes. As a reliable door installation team serving portfolios across DC, Maryland, and Virginia, we handle recurring replacement projects with one point of contact and consistent, itemized invoicing.
Are you licensed, bonded, and insured?
Yes, fully licensed, bonded, and insured, with a Certificate of Insurance available on request.